Comfort
- The operating water temperature in heat stations is hydraulic, thermal or both factors together
with the control systems it has, it can be adjusted to the desired temperature between 20-70 Dec.
- Polimeter and Calmet heat stations fixed domestic water regardless of flow changes
it guarantees its temperature.
- Plate heat exchanger with hot water requirement determined according to the size of the apartment and the number of seats
through it, it is met without the need for a waiting period.
- Operation of thermostatic radiator valves to control the temperature of each room
it provides an optimal environment suitable for its conditions.
Güvenlik
- Heat stations do not produce energy, hot water from the heat center is needed by the apartment
according to them, they direct by controlling.
- Therefore, there is no need for a separate natural gas line and an individual chimney for each apartment.
- A combustion process does not take place in the apartment, and since there is no special chimney, the flue gas
there is no risk of poisoning.
işletme ve bakım
- All pipes on the station are made of AISI 316 quality stainless material and are resistant to corrosion
provides high strength.
- AISI 316 quality with copper brazing, resistant to rust and liming in heat stations
plate heat exchangers made of stainless steel material in accordance with international norms
is used. In addition, the hydraulic connection and thermal balance observed in the system design are lime
the stone is protected against its formation.
Health
- Risk of "Legionella" because there is no storage of domestic hot water and it is prepared at the time of need
it disappears.
Investment
- 3 main columns in buildings where the usage hot water needs are met with heat stations
there is a need.
- Arrival from the energy center
- Return to the energy center
- Cold water network development
working principle
- Heat stations prepare domestic hot water using a plate heat exchanger.
- Mains water and central heat encountered on different surfaces of plates in the heat exchanger
the heat transfer between the hot water coming from the source takes place according to the principle of continuous Deceleration flow.
- Hot water from the heat source in the center to ensure the priority of domestic hot water
it is directed to the exchanger with thermostatic or proportional+thermostatic controls.
